Operation Per Remote Unit Cl Unicon - Cameo DURA SPOT Bedienungsanleitung

OPERATION PER REMOTE UNIT CL UNICON (optionally available)
After you have switched on the remote unit CL UNICON (press BACK briefly to switch on), the dis-
play shows "Update, Please Wait" for a short time (for service purposes only) and then the main
menu. Connect the remote unit to one or more RDM devices using DMX or network cables.
Select the menu item RDM/Fixture using the rotary-push encoder or by pressing the arrow
symbols  or  in the display and confirm the selection by pressing the encoder or the check
symbol ✔ in the display. A list of all connected RDM units is then displayed (in the example
DURA SPOT 60/DURA SPOT 60, DURA SPOT 100/DURA SPOT 100, DURA SPOT 200/DURA SPOT
200, DURA SPOT 400/DURA SPOT 400; the first part of the displayed RDM unit shows the unit
model, the second part after "/" is the label and can be individually adjusted in the menu item
Label for easier identification). Select the desired model and confirm the selection (in example
DURA SPOT 60/DURA SPOT 60).
All information and configuration options for the spotlight that can be called up and edited via
RDM are now displayed.
List of information and configuration options with explanations:
14
Functions of the operating elements
Display
Value up

Value down

Back

✔ Confirm
Encoder + BACK
↻
↺
BACK