Inspection And Maintenance - Optimum OPTidrill DQ 20V Betriebsanleitung

WARNING!
Before starting the machine you must be sure that

no dangers generated for persons,

the machine is not damaged.
6.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval Where?
Start of shift
After each
maintenance or
repair work
Every month
EN DQ20V
64
What? How?
Examination for outside damages.

Safety check on page 46

Lubricate the drill column regularly with commercial oil.

Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Img. 6-1:
Translation of original instruction
Drill column
Toothed rod
Maintenance
Version 1.0.1 - 2021-05-11