Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interval
Where?
as required
Every month
Every month
Maintenance
Version 1.0.1 - 2021-05-11
What?
How?
CAUTION!
The spiral spring can unwind. Parts can fly towards
you.
Loosen the nut. Under no circumstances remove the nut
completely from the thread!
Hold the spring housing with one hand, while using the other
hand to slowly remove the housing.
Rotate the spring housing about its own axis until the pin
snaps into the next notch.
If no resistance can be detected, the spring may be broken.
Img. 6-2:
Spindle return spring
INFORMATION
Ensure that the notch is always snapped into the
spring housing properly and subsequently tighten
the nut.
Lubricate the drill column regularly with commercial oil,
machine oil, engine oil.
Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Lubricate all oiler cups (height adjustment drilling table) with
machine oil, do not use grease guns or the like.
Translation of original instruction
Notch
Spring housing
Nut
DQ20V
EN
65
Werbung
Inhaltsverzeichnis
