Restarting; Inspection And Maintenance - Optimum OPTIdrill B 17Pro basic Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
5.1.2

Restarting

Before restarting, run a safety check.
WARNING!
Before starting the drill you must be sure that

no dangers generated for persons,

the drill is not damaged.
5.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions.
Interval Where?
Start of work
weekly
Every month
Every 6
months
Every 6
months
GB B17Pro basic
Page 56
®
What? How?

"Safety check" on page 41

Check if the slide rail screws for the V-belt tension on
the left and right side of the drilling head are well fas-
tened.
Loosening

Check if the V-belts are well tightened. Checking the
tension of V-belts,

Lubricate the drill column regularly with commercial oil.

Lubricate the toothed rod regularly with commercial
grease (e.g. friction bearing grease).
Oiling

Check the V-belts in the drill head for porosity and wear.
Visual
inspection
Check the electrical equipment / parts of the drilling machine.

"Qualification" on page 39
Testing
Translation of the original instructions

"Speed variation" on page 52.
Version 1.0
Maintenance
2019-01-17