Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
Extremely serious injuries to those working on the drill and
damage to the drill.
Only qualified personnel should carry out maintenance and repair work on the drill.
5.1.1
Preparation
WARNING!
Only work on the drill if it has been disconnected from the power supply.
5.1.2
Restarting
Before restarting, run a safety check.
WARNING!
Before starting the drill you must be sure that
no dangers generated for persons,
the drill is not damaged.
5.2
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions.
Interval
Where?
Start of work
Every month
Every 6
months
EN
DP26
62
What?
How?
"Safety check" on page 44
Lubricate the drill column regularly with commercial oil.
Lubricate the toothed rod regularly with commercial
grease (e.g. friction bearing grease).
Oiling
Check the V-belts in the drill head for porosity and wear.
Visual
inspection
Translation of original instructions
Maintenance
Version 1.0.2 - 2022-04-06
Werbung
Inhaltsverzeichnis
