Standard Spare Parts; Accessories; Minimising Wear And Preventing Damage - Viking MI 422 Gebrauchsanleitung

Do not remove the press-fit
connectors from the perimeter wire
as they can only be installed once.
Additional press-fit connectors are
available from a VIKING specialist
dealer. ( 16.)
Do not remove the perimeter wire
from the mowing area.
● Disconnect the power cable from the
docking station.
● Install the docking station cover.
( 9.4)
● Remove the docking station.
● Protect the terminals (connectors) of
the perimeter wire from environmental
influences (e.g. wrap with suitable
insulating tape).
● Carefully clean all external parts of the
robotic mower and the docking station.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry and locked place that is generally
free of dust. Dock the robotic mower in
the docking station. Make sure that the
machine is kept out of the reach of
children.
● Always store the robotic mower in good
operational condition.
● Keep all screws tightly fastened,
replace danger signs and warnings on
the machine that have become illegible,
check the entire machine for wear and
damage. Replace all worn or damaged
parts.
● Any machine faults must be completely
remedied prior to storage.
134
Never place or store objects on the
robotic mower or on the docking
station.
Resuming operation of the robotic
mower following prolonged
immobilisation:
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Install the docking station (
connect the perimeter wire. (
● Charge the battery ( 14.7)
● Check the time and date and set if
necessary ( 9.3)
● Check the mowing plan and change as
necessary. ( 10.6)
● Switch on automatic mowing (

16. Standard spare parts

Mowing blade:
6301 702 0101
Fixing pins AFN 075:
6301 007 1010
Perimeter wire ARB 151:
Wire diameter: 2,3 mm
Wire length: 150 m
0000 400 8630
Perimeter wire ARB 200:
Wire diameter: 2,3 mm
Wire length: 200 m
0000 400 8635
Perimeter wire ARB 501:
Wire diameter: 3,4 mm
Wire length: 500 m
0000 400 8625
Wire connector ADV 010:
6909 007 1090
Press-fit connector AKS 010:
for wire diameter: 2,3 mm
6909 007 1095
Press-fit connector AKS 011
for wire diameter 3,4 mm
6909 007 1096

17. Accessories

9.4) and
9.6)
Additional accessories are available for
the machine.
Further information is available from your
VIKING specialist dealer, on the internet
(www.viking-garden.com) or in the
VIKING catalogue.
For safety reasons, only
10.5)
accessories approved by VIKING
may be used with the machine.
18. Minimising wear and
preventing damage
Important information on maintenance
and care of the product group
Robotic mower, battery powered
VIKING assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your VIKING
machine:
0478 131 9923 B - EN