Adapting The Programming; Automatic Mowing; Mowing Independently Of Active Times - Viking MI 422 Gebrauchsanleitung

The opened flap can be removed
upwards from the machine. This
design is implemented for safety
reasons: This ensures that the
machine cannot be lifted and
carried by the flap.
Closing the flap:
Carefully fold the flap downwards and
allow to engage.
The robotic mower can only be
operated when the flap is fully
engaged.

14.3 Adapting the programming

The current programming can be seen in
the Mowing plan. ( 10.6)
The mowing plan is calculated based on
the size of the mowing area during
installation or during the creation of a new
mowing plan.
The active times and the mowing
duration can be changed individually, the
required mowing operations themselves
are automatically distributed over the
possible active times. If required, several
mowing or charging operations can run
during an active time. If required, the edge
of the mowing area can be cut
automatically at regular intervals.
( 10.14)
Up to three different active times per day
are possible. ( 10.6)
If the robotic mower has to travel to
specific areas of the mowing area, starting
points must be defined. ( 10.15)
0478 131 9923 B - EN
Under certain circumstances (e.g.
warm weather or generous time
window), not all the active times
may be necessary for optimal lawn
care.
Changing the active times: (
– Additional active times for further
mowing operations.
– Adapting the time window in order, for
example, to prevent mowing during the
morning or night.
– Omitting individual active times
because the mowing area is e.g. being
used for a party.
Extending the mowing duration: (
– There are areas which are not mown
sufficiently, e.g because the mowing
area has lots of corners.
– Intensive grass growth during the
growing period.
– Particularly dense lawn.
Reduction of the mowing duration:
( 10.8)
– Reduced grass growth due to heat, cold
or dryness.
Creation of a new mowing plan: (
– The size of the mowing area has been
changed.
New installation: ( 10.14)
– New location of the docking station.
– Initial operation on a new mowing area.

14.4 Automatic mowing

● Switching on automatic
mowing:
When automatic mowing is
10.7) switched on, the Automatic
symbol appears next to the battery
symbol in the display. (
● Starting mowing operation:
The mowing operations are
automatically distributed between the
available active times. (
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
10.8)
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button. (
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
14.5 Mowing independently of active
times
Mowing areas with docking station:
10.6)
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● In order to mow a part of the mowing
area that can only be reached via a
corridor, carry the robotic mower there.
● Immediate mowing:
Call up the command Start
mowing(
The mowing operation starts
immediately and continues until the
selected time.
10.5)
10.7)
14.6)
5.1)
10.5).
127