Environmental Protection; Standard Spare Parts; Ce - Manufacturer's Declaration Of Conformity - Viking MA 443 Gebrauchsanleitung

– corrosive and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

16. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.10).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
Waste products such as
batteries must always be
disposed of correctly. Observe
local regulations. Do not
dispose of the batteries with
domestic waste. Please hand them in to a
specialist dealer or at a hazardous waste
collection point.
50
All manuals and user guides at all-guides.com
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. VIKING
recommends VIKING specialist dealers.

17. Standard spare parts

Mowing blade:
6338 702 0111
Blade fastening screw:
6310 760 2800
The blade fastening screw must be
renewed each time the blade is
replaced. Spare parts are available
from a VIKING specialist dealer.
STIHL battery:
Your VIKING specialist dealer can provide
you with order information.
18. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
lawn mower, manually-operated and
battery-powered (MA)
Manufacturer's
brand
Type
Serial number
and the
Charger
Manufacturer's
brand
Type
Serial number
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
2006/66/EC, 2014/35/EU, 2011/65/EU
The products have been developed in
conformance with the following standards:
EN 60335-1, EN 60335-2-29,
EN 60335-2-77
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
Measured sound power level:
VIKING
92,5 dB(A)
MA 443.1
Guaranteed sound power level:
94 dB(A)
MA 443.1 C
6338
Langkampfen,
2016-01-02 (YYYY-MM-DD)
STIHL
AL 100
AL 101
AL 300
AL 500
4850
0478 131 9922 D - EN