Herunterladen Inhalt Inhalt Diese Seite drucken

Sharpening The Mowing Blade; Removing And Installing Carrier Plate - Viking MI 422 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Removing the blade:
Push in both tabs (1) on the
carrier plate with one hand and
hold. Remove the fastening
nut (2) with your other hand.
Remove the mowing blade together with
the fastening nut.
Installing the mowing blade:
Risk of injury!
Check the blade for damage before
installing. The blade must be
replaced if notches or cracks are
identified or if its width is less than
25 mm, or its thickness is less than
1,3 mm at any point. (
The carrier plate and the
fastening nut must also be
replaced if damaged (e.g. broken,
worn). The fastening nut in
particular must engage cleanly in
the carrier plate.
● Clean the blade, carrier plate and
fastening nut prior to installation.
0478 131 9923 B - EN
Fit the mowing blade (1) and fastening
nut (2) on the carrier plate (3) as
illustrated. Ensure correct position of the
retainers (4) in the mowing blade.
15.3)
Screw on the fastening nut (1) as far as
possible. Several clicks are audible during
tightening. Ensure secure seating of the
mowing blade by shaking carefully.
● Following installation of a new mowing
blade, confirm the blade replacement in
the "Service" menu. (
10.17)

15.5 Sharpening the mowing blade

VIKING recommends replacing a blunt
blade with a new one. Resharpening a
blunt mowing blade should only be carried
out by a VIKING specialist dealer as he
has the necessary expertise and special
tools.
Correct operation of the machine
can only be ensured with a very
precisely balanced mowing blade.
An incorrectly sharpened blade
(e.g. imbalance, incorrect
sharpening angle) increases noise
emissions and can result in
damage to the machine.
15.6 Removing and installing carrier
plate
The carrier plate can be removed in
order to clean the mowing deck.
● Activate the disabling
device (
5.2) and wear
gloves.
● Tilt the robotic mower onto its
side and lean it securely against a
stable wall. Carefully clean the mowing
deck and mowing blade. (
Removing the carrier plate:
● Remove the mowing blade. (
15.2)
15.4)
131

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Mi 422 p

Inhaltsverzeichnis