Standard Spare Parts; Circuit Diagram; Ce - Manufacturer's Declaration Of Conformity - Viking ME 339 Gebrauchsanleitung

– use of the product for sporting or
competitive events,
– resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the drive motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosive and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
44
All manuals and user guides at all-guides.com

16. Standard spare parts

Mowing blade
6320 702 0100
Blade fastening screw
6310 710 2800
The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a VIKING specialist
dealer.

17. Circuit diagram

1 Mains connection
2 On/off switch
3 connector
4 Capacitor
5 Engine
BL blue
BR brown
18. CE - Manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
Lawn mower, manually-operated and
mains-powered (ME)
manufacturer's
brand:
Type:
Serial number
conforms to the following EU guidelines:
2000/14/EC, 2002/95/EC, 2002/96/EC,
2004/108/EC, 2006/95/EC, 2006/42/EC
21
The product has been developed in
conformance with the following standards:
EN 60335-1, EN 60335-2-77
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
VIKING
ME 339.0
ME 339.0 C
6320
0478 121 9917 C - EN