Change Mains Input Fuses; Acceptance Of The Centrifuges For Repair; Disposal - Hettich EBA 270 Bedienungsanleitung

21

Change mains input fuses

Switch off the mains switch and separate the device from the mains!
A B
22

Acceptance of the centrifuges for repair

If the centrifuge is returned to the manufacturer for repair, it must be decontaminated and cleaned to protect persons,
environment and material.
We reserve the right to accept contaminated centrifuges.
Costs incurred for cleaning and disinfection are to be charged to the customer.
We ask for your understanding in this matter.
23

Disposal

The device can be disposed of via the manufacturer.
A Return Material Authorisation (RMA) form must always be requested for a return.
If necessary, contact the Technical Service Department of the manufacturer:
Andreas Hettich GmbH & Co. KG
Föhrenstrasse 12
78532 Tuttlingen, Germany
Phone: +49 7461 705 1400
Email: service@hettichlab.com
Disposal costs may be incurred.
WARNING
Risk of pollution and contamination for people and the environment.
When disposing of the centrifuge, people and the environment may be polluted or contaminated by
incorrect or improper disposal.
•
Removal and disposal may be carried out only by a trained and authorized service personnel.
The device is intended for the commercial sector ("Business to Business" - B2B).
According to Directive 2012/19/EU, the devices may no longer be disposed of with household waste.
The appliances are assigned to the following groups according to the Stiftung Elektro-Altgeräte Register (EAR
(German foundation under civil law)):
•
Group 5 (small appliances)
The crossed-out bin symbol indicates that the device must not be disposed of with household waste.
Regulations governing disposal of such devices may differ in individual countries. If necessary, contact
the supplier.
AB2300DEENFRIT
The fuse holder (A) with the mains input fuses is located next to the mains switch.
•
Remove the connecting cable from the machine plug socket.
•
Press the snap-fit (B) against the fuse holder (A) and remove.
•
Exchange defective mains input fuses.
Only use fuses with the rating defined for the type. See the following
table.
•
Reinsert the fuse holder until the snap-fit clicks shut.
•
Reconnect the device to the mains supply.
Model Type
EBA 270 2300
EBA 270 2300-01
Rev. 11 / 12.2022
Fuse Order no.
T 1,6 AH/250V E891
T 3,15 AH/250V E997
EN
47/85