Intended Use; Remaining Risks; Technical Specifications - Hettich EBA 270 Bedienungsanleitung

1

Intended use

The centrifuge EBA 270 is an in vitro diagnostic medical device according to the ln Vitro Diagnostic Medical Devices
Regulation (EU) 2017/746.
The device is used for centrifuging and enriching sample material of human origin for subsequent further processing
for diagnostic purposes. The user can set each of the variable physical parameters within the limits set by the device.
The centrifuge may only be used by qualified personnel in closed laboratories. The centrifuge is only intended for the
use referred to above. Intended use also includes observing all instructions in the Operating Manual and compliance
with the required inspection and maintenance work.
Any other use or use beyond this is considered improper. Andreas Hettich GmbH & Co. KG shall not be liable for any
damage arising from this.
2

Remaining risks

The device is built according to the state-of-the-art and the recognized safety regulations. If used and handled
improperly, there could be life-threatening danger to the user or third parties, or the device could be impaired or there
could be other property damage. The device is only to be used for its intended purpose and only when it is in safe
working condition.
Malfunctions which could affect safety must be corrected immediately.
3

Technical specifications

Manufacturer
Model
Basic-UDI-DI
Type
Mains voltage (± 10%)
Mains frequency
Connected load
Current consumption
Max. capacity
Allowed density
Speed (RPM)
Force (RCF)
Kinetic energy
Obligatory inspection
(DGUV Regel 100 - 500)
Ambient conditions (EN / IEC 61010-1)
− Set-up site
− Altitude
− Ambient temperature
− Humidity
− Excess-voltage category
(IEC 60364-4-443)
− Pollution degree
Device protection class
EMC
− Emitted interference,
Interference immunity
Noise level (dependent on rotor)
Dimensions
− Width
− Depth
− Height
Weight
AB2300DEENFRIT
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
4050674010007QC
2300
200 - 240 V 1∼
50 - 60 Hz
130 VA
0.7 A
Up to 2000 m above sea level
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
Not suitable for use in explosion-endangered areas.
EN / IEC 61326-1,
Class B
approx. 13.5 kg
Rev. 11 / 12.2022
EBA 270
2300-01
100 - 127 V 1∼
50 - 60 Hz
125 VA
1.25 A
6 x 15 ml
3
1.2 kg/dm
4000
2254
250 Nm
no
Indoors only
2°C to 40°C
ΙΙ
2
Ι
FCC Class B
≤ 51 dB(A)
326 mm
389 mm
239 mm
EN
33/85