Change Mains Input Fuse; Acceptance Of The Centrifuges For Repair - Hettich EBA 20 Bedienungsanleitung

18

Change mains input fuse

Switch off the mains switch and separate the centrifuge from the mains!
A B
19

Acceptance of the centrifuges for repair

If the centrifuge is returned to the manufacturer for repair, it must be decontaminated and cleaned to protect persons,
environment and material.
We reserve the right to accept contaminated centrifuges.
Costs incurred for cleaning and disinfection are to be charged to the customer.
We ask for your understanding in this matter.
The fuse holder (A) with the mains input fuses is located next to the mains switch.
•
Remove the connecting cable from the machine plug socket.
•
Press the snap-fit (B) against the fuse holder (A) and remove.
•
Exchange defective mains input fuses.
Only use fuses with the rating defined for the type. See the following
table.
•
Reinsert the fuse holder until the snap-fit clicks shut.
•
Reconnect the centrifuge to the mains supply.
Model Type
EBA 20 2002
EBA20 2002-01
Fuse Order no.
T 1,6 AH/250V E891
T 3,15 AH/250V E997
EN
23/46