Digital Drilling Depth; Table Inclination - Optimum OPTIdrill D 17Pro Betriebsanleitung

4.5.2

Digital drilling depth

Displays the current drilling depth.
Display
On / Off
Unit
Metric / Inch
Img. 4-3: Digital readout
4.6

Table Inclination

CAUTION!
The further the drilling table is tilted to the left or right, the lower the carrying capacity
and the clamping action of the inclined drilling table.
The drilling table can be inclined to the
right or to the left.

Loosen the fastening screw.

Pull out the set screw.

Set the desired angle using the scale.

Re-tighten the fixing screw again.
INFORMATION
If you can not pull out the threaded pin, so the seat can be solved by turning at the nut clock-
wise.
INFORMATION
The threaded pin is only provided for correct positioning of a horizontal level of the drilling table.
EN
D17 Pro│D23 Pro│D26 Pro│D33 Pro
92
Drilling depth zero
point
Switching to
rev counter
Fixing screw
Scale
Threaded pin
Translation of original instruction
Img. 4-4: Fastening screw
Version 1.0.3 - 2022-04-06
Operation