Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. After assembly, make sure that the
adjusting screw points forward when
the drill chuck protection is closed.
INFORMATION
There is a switch integrated in the fixture of drill chuck protection which monitors the closed
position. The machine cannot be started, if the drill chuck guard is not closed.
EN
D17 Pro│D23 Pro│D26 Pro│D33 Pro
84
Adjusting screw
Translation of original instruction
Img. 3-7:
Assembly 3
Version 1.0.3 - 2022-04-06
Werbung
Inhaltsverzeichnis
