Roller's Multi-Press 22 V ACC Connected Betriebsanleitung Seite 26

eng
2.4 Registering the Drive Unit, Connecting the Mobile Terminating Device
and Connecting the Drive Unit with Internet to the Cloud
In order to use the Connected functionality, a registration of the drive unit in
the ROLLER Service Portal and a connection of the drive unit with the Internet
to the Cloud are necessary.
Note: The ROLLER'S Multi-Press 22 V ACC Connected drive unit can also be
used without a registration of the drive unit and without a registration of the drive unit and without
Internet. However, the functions of the Connected functionality are not available
in this case. If there is no existing Internet connection, Data are stored on the
drive unit and sent to the Cloud as soon as the drive unit has been registered
and an Internet connection exists.
2.4.1. Registering the Drive Unit in the ROLLER Service Portal
Drive units can be registered to a logged in user in the ROLLER Service Portal.
If you do not have a user account yet, create a user account in the ROLLER
26
Select time format
● hh:mm (24 h)
● hh:mm (12 h)
Select pressure unit
● bar
● psi
Setup Support/Telediagnosis
Send maintenance message "SUPPORT" for telediagnosis
Set up Wi-Fi connection/activate Access-Point
Display: Name of the connected Wi-Fi network
Display: Name of the drive unit's Access-Point
Password for Wi-Fi connection
IP address of the Access-Point
Set up Wi-Fi connection/activate Access-Point
Display: Wi-Fi is deactivated
Display: Name of the drive unit's Access-Point
Password for Wi-Fi connection
IP address of the Access-Point
Set up Wi-Fi connection/activate Access-Point
Display: Wi-Fi connection not yet established or no stored Wi-Fi network available on the drive unit
Display: Name of the drive unit's Access-Point
Password for Wi-Fi connection
IP address of the Access-Point
Reset to factory settings
Reset to factory settings
Usage bar active, reset to factory settings not possible, read the instruction manual.
Restore fi rmware version
Local RESTORE
Wi-Fi RESTORE
without without a connection to the without a connection to the
Service Portal (https://service.albert-roller.de) with the LOGIN menu item. Click
on the activation link in the received e-mail to confi rm the specifi ed e-mail
address and as a fi nal login step.
● Switch on the drive unit.
● Press the right button (22) to open the "Setup"
button again. Press the left button to show the "Setup with the ROLLER
Service Portal" page. Press the right button to call the QR code.
● Scan the QR code with the mobile terminating device, e.g. with the camera.
The ROLLER Service Portal opens in the browser. Log in the user in the
ROLLER Service Portal
● Press the "Register product" button. Successful registration is confi rmed.
If the drive unit is already registered, the "MANAGE PRODUCT" page is
opened directly.
eng
menu. Press the right