Kärcher SB OB Originalbetriebsanleitung Seite 19

User symbols
Operator
Owner
Service
Changing the setting
1. Press the Change Setting button next to the proper-
ty you want to change.
Change Setting button
A selection window opens to select the desired set-
ting or a keyboard opens to enter the desired value.
Menu overview
Menu Washing
The current operating state of the system is displayed in
the Washing menu.
Credit (amount) / remaining washing time
1
Running washing programme
2
Run time per wash value / (cash) amount corre-
sponding to one wash value
Name of the menu item
3
Display: System open (green) or system closed
4
(red)
Home button
5
press briefly - go back one menu level
press long - go back to start menu
Menu Service
The Service menu is only accessible for customer ser-
vice.
Menu Settings
The operating parameters of the system are set in the
Settings menu.
"General" menu button
1
"Machine" menu button
2
"Wash-Program Settings" menu button
3
"User Administration" menu button
4
Menu User Administration
The user group is selected in the User Administration
menu. Different user groups have different access rights
"Service" button
1
"Owner" button
2
"Operator" button
3
A code must be entered when selecting the "Owner"
and "Service" user groups.
Note
Code default setting: 1111
Keyboard
1
Input field
2
Confirm the entry
3
Delete the entry
4
Changing the code
For the Owner user group, the code can be changed af-
ter logging in.
1. Press the "..." button.
"..." menu button
1
English
2. Enter the desired code in the "EnterNew Code" win-
dow.
3. In the "Confirm New Code" window enter the same
code again for confirmation.
Menu Wash-Program Settings
The parameters of the individual washing programmes
are set in the Wash-Program Settings menu.
Next window button
1
Change washing programme button
2
Previous window button
3
Window 1 of 2
4
Washing programme name
5
Changing the parameters of a washing programme
1. Select the window with the desired washing pro-
gramme. To do this, use the Next Window and Pre-
vious Window buttons.
2. Press the Change Washing Programme button next
to the desired washing programme.
Change parameters button
1
Programme run time for one wash value in seconds
2
Water type (hot water/cold water)
3
Detergent dosing
4
Washing programme name
5
Detergent name
6
Change Detergent button (the colour corresponds
7
to the colour code on the dosing pump)
3. Press the button to change the desired parameter.
4. Press the desired parameter in the displayed selec-
tion.
Standard setting
Washing pro- Dosing water type Program
gram pump
High-pressure 1 (yellow) hot
wash
Foam wash 1 (yellow)
Rinse - cold
Hot wax 2 (red) hot
Insects Loosen- 3 (green) hot
ing
Dirt Loosening 3 (green) hot
Power foam
Power rim foam
Top care cold
duration
19