Cable Assembly; Components; Safety Instructions - Abicor Binzel PSB 31 Betriebsanleitung

3. Technical data
(continuation)

4. Components

5. Safety
instructions
General torch data with reference to EN 60 974-7
Application processes:
Type of voltage
Type of cooling:
Type of guide:
Voltage measurement:
Protection type of the
connections on the machine side: IP2X (EN 60 529)

Cable assembly

Standard length:
Connection power/air cable
Execution:
PSB Operating Rating
mode D.C.
60 %
Duty Cycle Duty Cycle
(A)
31
Single gas 30
60
Single gas 60
121
Double gas 60
The plasma cutting torches in this series are delivered as a complete unit ready
for operation, i.e. with cable assembly and individual connection or central
connection.
Check whether correct equipment parts have been selected for initial
assembly.
Please see current equipment data leaflets for consumables as well as
ordering information and part numbers.
Operating instructions of PSB
Please read these operating instructions completely prior to use to ensure pro-
per operation and avoid potential hazards and misuse.
5.1 Explanations
Danger!
A procedure which if not followed may lead to serious injury to those
operating the machine or to bystanders.
Warning!
A procedure which if not followed may lead to damage of the
product or the installation.
Plasma cutting / joint preparation
D.C. voltage
air-cooled
manual
Peak value of 500 V
6 m (other lengths available on request)
G 1/4
Single connection or central connection
Gas supply Operating specs.
max.
35 % entry-
ressure flow
p
(A) (bar)
50 Plasma-/Cooling gas 3.5 - 4.5
60 Plasma-/Cooling gas 5.0 - 6.0
100 Plasma gas 3.5 - 4.5
Cooling gas 5.5 - 7.0
automatic
Peak value of 500 V
IP2X (EN 60 529)
Ignition
req. Air post voltage
volume flow-
(l/min) (sec.) (kV)
130 ca. 15 7
150 ca. 60 7
15 7
150 ca. 60
17