Starting The Dishwashing Programme; Unloading The Dishwasher - hanseatic HGTI6082C14T7735ES Gebrauchsanleitung

Starting the dishwashing
programme
(6)
1. Start the programme with the
(11).
If you
– have not set up a start delay, the pro-
gramme cycle will begin after a few
seconds.
– have set up a delayed start, the dis-
play will initially still show the start-de-
lay duration (6); the dots between
the number of hours and minutes will
flash. After the delayed start duration
runs out, the programme will start.
During the programme, the display will
show the time remaining (6); the dots be-
tween hour and minute numbers will flash.
At the end of the programme cycle, an
acoustic signal will sound 8 times and the
display will show
end
2. Switch the dishwasher off using the
ton (18).
3. Turn the tap off.
4. Wait a little while before unloading the
dishwasher.
(11)
button
.
but-
Dishwasher operation Programme table

Unloading the dishwasher

CAUTION
Risk of scalding!
Hot steam emitted when opening the
appliance door can cause scalding.
Maintain a sufficient distance from
■
the appliance door and do not hold
your head or upper body directly
above the open appliance door.
Make sure that children do not open
■
the appliance door if the programme
has only finished a short time ago.
Only open the appliance door slight-
■
ly to allow the steam to escape more
easily.
Allow the dishes to cool before un-
■
loading the dishwasher.
Risk of injury!
An open appliance door can easily be-
come a trip hazard.
Close the appliance door after every
■
use.
Only leave the appliance door slightly
■
open to cool down.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may damage it.
■ Make sure that children and pets do
not stand on the open door.
Page EN-23