Page EN-22
Programme table
Dishwasher operation
Quick wash
(17)
This option allows you to accelerate the
cleaning programme.
This option is only available with the pro-
grammes
,
,
and
•
To activate this option, press the
ton (17).
The
indicator (7) will light up on the
display.
•
To deactivate this option, press the button
again.
The indicator will disappear from the dis-
play.
Activate/deactivate automatic
door opening
(16)
The "Automatic door opening" function is ac-
tivated as standard.
•
To deactivate the "Automatic door open-
ing" mode, touch the
The
indicator (8) will go out. The appli-
ance door remains locked when the pro-
gramme has reached the drying phase.
•
To activate the "Automatic door opening"
mode, touch the
button (16).
The
indicator (8) will light up. The ap-
pliance door opens as soon as the pro-
gramme has reached the drying phase.
(7)
.
but-
(8)
button (16).
Selecting the spraying arm(s)
(15)
(9)
If only one of the two dish racks is loaded, you
should deactivate the spraying arm which you
do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
•
Press the
button (15) as many times
as necessary until only the symbol for the
spraying arm you require lights up.
Delayed start
(6)
The wash cycle normally starts as soon as
you press the
button (11).
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
•
Press the plus or minus button (12) re-
peatedly until the display (10) shows the
desired start-delay duration (
).
H : 2 4
(12)
,
to
H : 0 0
H : 0 1