Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Selecting and starting the
dishwashing programme
It is recommended that you carry out a
test run before the first dishwasher cy-
cle in order to remove residues from the
manufacturing process and in order to en-
sure that the appliance functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Switch on the appliance with the
ton (1).
2. Select the suitable dishwashing pro-
gramme based on the "programme table";
see page EN-21.
3. Press the
button (18).
4. Close the appliance door to start the dish-
washing programme.
During the programme cycle, the two dots
between the hour and the minute will flash
in the display (16).
When the programme is finished, a beep
will sound eight times.
5. Now turn off the water tap and press the
button to switch off the appliance.
6. Continue with "Unloading the dishwasher"
on page EN-25.
Delayed start
The washing cycle will normally begin as
soon as the appliance door has been closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
1. Press the button
(17) as many times as
necessary for the display (16) to show the
delay required (
,
H : 0 0
2. Press the button
(18).
3. Close the door of the appliance.
When the start delay is active, a colon
flashes in the display.
When the time delay has elapsed, the
dishwashing programme starts.
but-
to
).
H : 0 1
H : 2 4
Dishwasher operation
Additional options
You can combine the various dishwashing
programmes with additional options. The ad-
ditional options must be selected before start-
ing the dishwashing programme.
– "Quick wash"
(11):
This option shortens the programme cy-
cle. It is recommended for crockery with
minimal staining.
This option cannot be selected with
"Auto"
, "Short programme"
rinse"
.
– "Bottle cleaning"
(12):
This option can be used for cleaning bot-
tles in the upper dish rack (32).
This option cannot be selected with
"Auto"
, "Pre-rinse"
ing"
.
– "Extra dry"
(13):
This option increases the drying effect
by increasing the temperature in the final
rinse phase and the drying time.
This option can only be selected with
"ECO"
, "Quiet/night"
Activating/deactivating
automatic door opening
At the end of a programme, the appliance
door automatically opens for a better drying
effect and to reduce energy consumption dur-
ing the drying phase. The function is pre-ac-
tivated when a dishwashing programme is
selected.
•
To deactivate the "Automatic door open-
ing" mode, press the
The appliance door remains locked when
the programme has reached the drying
phase.
•
To activate the "Automatic door opening"
mode again, press the
This option cannot be selected with
"Short programme"
"Self-cleaning"
.
page EN-23
or "Pre-
or "Self-clean-
and "90 min"
.
(14) button.
button.
, "Pre-rinse"
or
Werbung
Inhaltsverzeichnis
