Water Hardness - hanseatic HGTI6082C14T7735ES Gebrauchsanleitung

Page EN-36 Installation, connection and initial commissioning

Water hardness

Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the phar-
macy.
Water hardness
in the household in
°dH
0–5
6–11
12–17
18–22
23–34
35–55
1. Obtain the appropriate setting from the
table above.
2. Close the dishwasher door.
(18)
3. If the dishwasher is switched on, switch it
off with the button (18).
Setting the water hardness level
Do not allow more than 1 minute to elapse
between the following steps, otherwise the
setting process will be interrupted.
1. Switch on the dishwasher using the
Level on the
appliance
H1
H2
2. Press and hold the P button (13) until the
H3
H4
3. Press the P button repeatedly until the de-
H5
4. Around 5 seconds after you last push the
H6
button (18).
(5) and (2)
(13)
indicators (5) and
nately.
sired setting is displayed.
button, the dishwasher will automatically
revert to the normal display.
The hardness level setting is saved.
(2) flash alter-