Page EN-38
Troubleshooting table
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt, con-
tact our service department (see
page EN-42).
Only carry out the actions which are
■
described in this user manual.
■ Never try to repair the appliance
yourself. You can endanger yourself
and subsequent users.
Problems with operation
Problem
The dishwasher cannot
be switched on.
The selected
dishwashing
programme will not
start or it stops.
Risk of damage to property!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
■
Possible cause
The mains plug has not
been inserted into a socket.
There is no voltage being
supplied through the socket.
The appliance door is not
closed properly.
The water tap is not properly
on.
The inlet hose is defective.
There is a risk of
overflowing. The electrical
water stop system has been
activated.
NOTICE
If water overflows, switch off the
water supply immediately and then
contact the service department (see
page EN-42).
If the water has overflowed, remove
any water standing in the dishwasher
before restarting a wash programme.
Solution
Insert the mains plug into the
socket.
Check the fuse. Check the socket
by connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our Service department
(see page EN-42).