Error Indicators - hanseatic HGTI6082C14T7735ES Gebrauchsanleitung

Page EN-40 Troubleshooting table
Problem
The dishes are not
completely clean.

Error indicators

Code
:
E1
It takes too long for the
water to fill up
:
E3
The heating element is
defective
:
E4
Water overflow
:
Eb
Internal fault
Possible cause
There are food scraps which
are encrusted onto the
dishes.
The dishes have not been
stacked optimally.
You have selected the
incorrect dishwashing
programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too
low.
The spraying arms cannot
rotate unhindered.
The nozzles on the spraying
arms are clogged by
limescale or other objects.
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see
"Connect the inlet hose" on page EN-30).
Ensure that the water pressure is correct (see "Technical
specifications" on page EN-45).
Have the appliance examined and repaired.
Switch off the tap. Find the gap in the seal (or have someone find
it) and repair the leak (or have it repaired).
Have the appliance examined and repaired.
Solution
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see "Loading the
dishwasher" on page EN-16).
Select the correct dishwashing
programme (see "Programme
table" on page EN-20).
Use the correct dosage of
dishwasher detergent (see
"Programme table" on page EN-20).
Turn the water tap on completely.
Ensure that no dishes are
impeding the motion of the
spraying arms.
Clean the nozzles (see "Checking
and cleaning the spraying arm and
spray nozzles" on page EN-27).