Programme Table - hanseatic HGTI6082C14T7735ES Gebrauchsanleitung

Page EN-20

Programme table

Programme table
Select the desired programme using this table.
Programme overview
Automatic programme: For
slightly to heavily soiled
dishes with or without dried-
on food scraps
Intensive: For heavily soiled
dishes, saucepans and frying
pans
Universal: For dirty dishes,
pots and glasses and lightly
soiled pans
ECO: The most efficient
programme for normally
soiled dishes in terms of
4)
combined energy and water
consumption
Glass: For lightly soiled
dishes and glasses
90-minute programme: For
lightly soiled dishes – Note:
The dishes remain slightly
damp.
Short programme: For
slightly soiled glasses and
cups as well as dishes
without dried-on food scraps
- Note: As the dishwashing
programme does not have a
drying cycle, the dishes will
remain damp.
Pre-rinse:
Pre-rinse roughly if the main
wash cycle will only be
launched later.
Other than 'ECO', the values specified for the programmes are only guidelines.
• = Number of cycles
1)
Pre-rinse/Cleaning
2)
The values apply to laboratory conditions; they may vary in day-to-day use.
3)
The ECO programme is used to check compliance with EU eco-design regulations; according to
4)
DIN EN 60436 with rinse aid setting: 5, setting for the degree of hardness: H3.
Programme
sequence
1)
● ● ●● ● 4/18
● ● ●●● ● 4/18
● ● ●● ● 4/18
● ● ●● ● 4/18
● ● ●● ● 4/18
● ●● ● 22
● ●● ●● — 12
●
Consumption
85 8.5 0.850
55–65/
– – –
50–55
150 18.0 1.550
65/60 205 16.6 1.500
55/55 175 13.6 0.980
50/50 198 9.8 0.747
50/50 120 13.5 0.950
60/50 90 12.5 1.180
45/45 30 11.2 0.820
15 4.1
3)