Customer Programming; Programming Flow Chart; Programming Menu - Faema Faemina Gebrauch Und Installation

CUSTOMER PROGRAMMING

CUSTOMER PROGRAMMING
16. Programming flow chart
1

PROGRAMMING MENU

access is gained to customer programming pressing
the OK key for 5 seconds.
To enter into the PROGRAMMING MENUS press the
key: .
To return to normal working press the key:
EXITING THE PROGRAMMING PANELS
Before exiting the panels:
- press the
- press the
24
.
OK
key to confirm any changes made to the values;
key to leave the values unchanged
2
- then use the 5 keys for navigation
1
2 3
Use the and keys to position the cursor (white line)
on the desired line and then press the
Always use the and
point, there are 2 options:
1) Confirm the changes by pressing OK
2) Exit the menu, leaving the data unchanged, by pressing
.
OK
key.
keys to alter values. At this