Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance, Repair And Disposal; Declaration Of Conformity - IFM Electronic CR2513 Handbuch

Ecomat100 ein-/ausgangs-modul input
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Name
Data type
AnaOut1
INT
AnaOut2
INT
AnaOut3
INT
AnaOut4
INT
BinIn1
BOOL
BinIn2
BOOL
BinIn3
BOOL
BinIn4
BOOL
AnaIn1
INT
AnaIn2
INT
AnaIn3
INT
AnaIn4
INT

Maintenance, repair and disposal

As the module does not contain any components which must be maintained by
the user, the housing must not be opened.
The maintenance of the module may only be carried out by the manufacturer.
The disposal must be carried out according to the corresponding national envi-
ronmental regulations.

Declaration of conformity

The CE marking is applied on the basis of the EMC guideline EMC 89/336/EEC,
implemented in the standards EN 500 81-1 and EN 500 82-2 as well as the low
voltage guideline NS73/23/EEC, implemented in the standard EN 61010.
Description
analog output value (PWM), channel 1
analog output value (Danfoss)
analog output value (PWM), channel 2
analog output value (Danfoss)
analog output value (PWM), channel 3
analog output value (Danfoss)
analog output value (PWM), channel 4
analog output value (Danfoss)
binary input status, channel 5
0 = input status „FALSE"; 1 = input status „TRUE"
binary input status, channel 6
0 = input status „FALSE"; 1 = input status „TRUE"
binary input status, channel 7
0 = input status „FALSE"; 1 = input status „TRUE"
binary input status, channel 8
0 = input status „FALSE"; 1 = input status „TRUE"
analog output value, channel 9
voltage,
if configuration = 3
ratiometric, if configuration = 6
current,
if configuration = 7
analog output value, channel 10
voltage,
if configuration = 3
ratiometric, if configuration = 6
current,
if configuration = 7
analog output value, channel 11
voltage,
if configuration = 3
ratiometric, if configuration = 6
current,
if configuration = 7
analog output value, channel 12
voltage,
if configuration = 3
ratiometric, if configuration = 6
current,
if configuration = 7
/
INPUT
OUTPUT MODULE
(if config. = 4)
(if config. = 8)
(if config. = 4)
(if config. = 8)
(if config. = 4)
(if config. = 8)
(if config. = 4)
(if config. = 8)
(if config. = 1)
(if config. = 1)
(if config. = 1)
(if config. = 1)
CR2513
47
PAGE

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis