Operating Indicators (Status Led) - IFM Electronic CR2513 Handbuch

/
INPUT OUTPUT MODULE
Operating indicators
LED colour Status
green
flashing
red
If both faults occur simultaneously, the LED appears orange.
Explanation of the abbreviations in the object directories:
0x... = hexadecimal number
str = string
rw = read-write
ro = read only
u8 = unsigned 8 bit
u16 = unsigned 16 bit
u32 = unsigned 32 bit
(see also "Terms and abbreviations", page 48)
34
PAGE
CR2513
OFF
CANopen state: PREOPERATIONAL / PREPARED
ON
2 Hz
OFF
ON
- no synch objects (if synch monitoring is active)
Description
no supply voltage
module in the stand-by mode
outputs = OFF
Input states are not transferred
module active
CANopen state: OPERATIONAL
outputs are updated
Input states are transferred
communication o.k.
communication disturbed
- NodeGuard error (if NodeGuarding is active)