Finish On Top; Mdf- Or Plasterboard Finish On Top; Finish On Top Using A Finishing Profile; Plastering Profile - Renson Fixvent Mono AK/UT EVO Montageanleitung

Fixvent Mono AK/UT
®
en
7.2 • Finish on top

7.2.1 MDF- or plasterboard finish on top

This product is made with a view to guarantee a perfect finish. For this purpose, there is a recess
at the top for plasterboard or MDF panels up to 10 mm so that the plasterer can work the product
seamlessly into the plasterwork.

7.2.2 Finish on top using a finishing profile

You need to use the optional aluminium finishing profile for traditional wet plastering. This profile
is available in the same finish as the box's inner profile. This finishing profile must be as long as
the total length of the Fixvent Mono AK/UT
7.3 • Plastering profile
1
54
• Fixscreen
EVO
/ Fixscreen Mono AK
EVO
We supply as standard two plastic plaster profiles (click fitted to
the end caps).
If a continuous profile is ordered with a Fixscreen Mono AK
it runs through to the sides of the box. In that case, no plaster
profiles are supplied.
Mono AK
®
EVO
.
EVO
,
EVO