Installing The Removable Part Of The Side Channel; Finishing - Renson Fixvent Mono AK/UT EVO Montageanleitung

Fixvent Mono AK/UT
®
6.2 • Installing the removable part of the side channel
1
7 • Finishing
For maintenance reasons, the aluminium inner flap must remain accessible and
removable after plastering.
• Fixscreen
EVO
Mono AK
®
• Put the removable part of
the side channel back in
place and screw it tight to
the fixed part, using the
supplied screws and a hex
key.
When finishing on the outside
(rendering work), pay at-
tention to the fact that you
must be able to disassemble
the removable side channel
at any time. For that reason,
the side of the removable side
channel must always
remain free.
EVO
en
51