General Information; Introduction; Purpose Of The Manual; Identifi Cation Of Manufacturer And Equipment - Stiga Autoclip 527S Bedienungsanleitung

GENERAL INFORMATION

EN Congratulations on purchasing this product, which we are certain will meet your needs and expectations. This project was created by ZUCCHETTI
CENTRO SISTEMI S.p.A. (UNI EN ISO 9001 certifi ed company), a software house that since 1982 has consolidated its activities and presence
on the international market.
Applying advanced IT solutions in the fi eld of industrial automation means optimising the production activities and simplifying the work procedures.
This product was created on the basis of on-going research by ZUCCHETTI's laboratories.
•
This manual forms an integral part of the appliance and was produced by the Manufacturer to provide the necessary information to people
authorised to interact with it during its working life.
•
Operators of the appliance must adopt correct working practices and must carefully read and follow all the instructions contained in this
manual.
•
This manual is written by the Manufacturer in the original language of Italian and may be translated into other languages to meet legal and/
or commercial requirements.
•
Carefully read the instructions contained in this manual to avoid any unnecessary risks to people's health and safety, as well as economic
damages.
•
Keep this manual in a safe and easily accessible place for quick reference.
•
Some information and illustrations contained in this manual may not perfectly correspond with the appliance in your possession; however,
this does not affect its functioning.
•
The Manufacturer reserves the right to make changes without any obligation to provide prior notice.
•
The following symbols are used throughout this manual to highlight some particularly important information or to identify some important
specifi cations.
Danger - Attention
This symbol indicates situations involving imminent danger, which, if ignored, could put people's health and safety at risk.
Warning – Caution
This symbol indicates situations where it is necessary to behave in a certain way in order to avoid putting people's health
and safety at risk, and to protect the device.
Important
This symbol identifi es particularly important technical information which must not be ignored.
The nameplate shown here is applied directly onto the appliance. It
contains references and all the information essential for safely operating
the device.
For any technical requirements, please contact the Manufacturer's
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identifi cation plate, the approximate hours of use and the type of fault
detected.
A.
Name of manufacturer
B.
CE conformity label
C.
Model / serial number / manufacturing year
D.
Technical specifi cations
User's manual

INTRODUCTION

PURPOSE OF THE MANUAL

IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
DATA PLATE
(A) Name of manufacturer
(B) CE conformity label
(C) Model
(D) Technical specifications
(C) Serial number
2
(C) Manufacturing year