Herunterladen Inhalt Inhalt Diese Seite drucken

Robot Safety Stop; Automatic Return To The Charging Station; Use Of The Robot In Closed Areas With No Charging Station - Stiga Autoclip 527S Bedienungsanleitung

Inhaltsverzeichnis

Werbung

During use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the "OFF/STOP" key. In case of danger
or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade from accidently starting.
Press the "STOP" key to stop the robot. Press the "STOP" key again to restart the robot.
EN
Important
The robot safety stop is necessary during maintenance
and repairs (for example, replacement and/or recharging
of the battery, blade replacement, cleaning operations,
etc.).
The robot stops the work cycle if the following conditions are verifi ed.
-
End of working time: At the end of the working time, the robot automatically returns to the charging station and starts operating again
according to what has been programmed (see "Programming Mode").
-
Rain: In case of rain, the robot automatically returns to the charging station and starts operating again according to what has been
programmed (see "Programming Mode").
-
Battery to be charged: The robot automatically returns to the charging station.
-
Lawn mowed (only for some versions, see "Technical Specifi cations): If the sensor detects that the lawn has already been mowed, it
automatically returns to the charging station and starts operating again according to what has been programmed (see "Programming Mode").
The start-up of the robot in "closed area" mode is for mowing closed areas
which are delimited by the perimeter wire and which have no charging
station.
Warning – Caution
Carry the robot using the handle provided. Do not grab the
robot by the body and always use the handle provided.
Position the robot inside the work area at a minimum distance of 100 cm
(39.37 ") from the perimeter wire and from any other obstacle.
User's manual

ROBOT SAFETY STOP

AUTOMATIC RETURN TO THE CHARGING STATION

USE OF THE ROBOT IN CLOSED AREAS WITH NO CHARGING STATION

E N T E R
min. 100 cm
(39,37 ")
24
"STOP" KEY (A)
min. 100 cm
(39,37 ")

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Autoclip 527

Inhaltsverzeichnis