Main Parts - Stiga Autoclip 527S Bedienungsanleitung

1.
Robot.
2.
Keyboard commands: for setting and displaying the operating modes of the robot.
3.
Rain sensor: detects rain and commands the robot to return to the charging station.
4.
Battery: supplies power to the motors of the blade and drives the wheels. The robot is supplied with one or more lithium batteries located
under the models already assembled in some models.
5.
Handle: for lifting and carrying the robot.
6.
Cutting blade : cuts the grass already assembled in some models.
7.
Perimeter wire coil: cable with special insulation and special features for carrying the signal needed to operate the robot.
8.
Pegs : for securing the perimeter wire and the charging station.
9.
Power cord for the power supply unit.
10.
Power Supply unit : supplies power in low voltage to the batteries.
11.
Charging station: for recharging or keeping the robot charged.
12.
Transmitter: transmits the signal to the perimeter wire.
13.
User manual.
2
1
5

MAIN PARTS

4
13
6
3 12
8
11
7
7
10
9
User's manual
EN