Werbung
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under "Technical Data" fulfi lls all the relevant regulations and the
directives 2011/65/EU (RoHs),
2006/42/EC, 2004/108/EC and the following harmonized standards
have been used:
EN 61029-1:2009 + A11:2010;
EN 61029-2-9:2012 + A11:2013
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2013
Winnenden, 2014-11-20
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the system
voltage indicated on the rating plate. It is also possible to connect
to sockets without an earthing contact as the design conforms to
safety class II.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and AEG spare parts. Should
components need to be replaced which have not been described,
please contact one of our AEG service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the machine type printed as well as the six-digit No. on the
label and order the drawing at your local service agents or directly
at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
10
ENGLISH
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the machine.
Please read the instructions carefully before
starting the machine.
Wear ear protectors!
Always wear goggles when using the machine.
Always keep hands away from the path of the saw
blade.
Never expose tool to rain.
Do not stare into beam.
This product corresponds to the
laser class 2 in accordance
with EN 60825-1:2007.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
Class II tool, tool in which protection against
electric shock does not rely on basic insulation
only, but in which additional safety precautions,
such as double insulation or reinforced insulation,
are provided.
There being no provision for protective earthing or
reliance upon installation conditions.
European Conformity Mark
EurAsian Conformity Mark.
DESCRIPTION
1.
Upper guard
2.
Lower guard
3.
Cover plate
4.
Cover plate screw
5.
Sliding fence
6.
Table
7.
Base
8.
Mitre indicator
9.
Bevel lock lever
10. Top carry handle
11. Slide tube(s)
12. Slide lock knob
13. Slide fence lock knob
14. Combination wrench
15. Mitre lock lever
16. The repeat-A-Cut
17. Depth adjustment cam
18 Arbor lock pin
19. Lower guard safety lock knob
20. ON/OFF switch
21. Bevel index pin
22. Front carry handle
23. Workpiece clamp
24. Bevel indicator
25. Cord wrap brackets
26. Saw blade
27. Arbor screw (Left hand thread)
30. Blade flanges
31. Blade washer
32. Clamp support shaft
33. Quick release buttom
34. Mitre index wheel
35. Depth adjustment knob
36. Slide rail
37. Pivot assembly
38. Grub screw
39. Back fence
40. Bevel scale
41. Locking jam nuts
42. Hex lock nut
43. Mitre scale
44. Spacer
45. Roller
46. Torsion spring (inside)
47. Arm pivot shaft
48. Dust bag
49. Dust bag frame
50. Dust elbow
STANDARD ACCESSORY
6.35 mm Hex "L" Combination wrench
Workpiece clamp
Dust Bag
Owner's manual
Dust bag frame
Dust elbow
UNPACKING
WARNING
To reduce the risk of injury from unexpected
starting or electrical shock, do not plug the power
cord into a power source outlet during unpacking
and assembly. This cord must remain unplugged
whenever you are working on the saw.
This Miter Saw is shipped complete in one box.
WARNING
Although compact, this saw is heavy. To reduce
the risk of back injury, get help whenever you
have to lift the saw.
Before removing the miter saw from the carton tighten
■
the slide lock knob to guard against sudden movement.
■
Remove the miter saw from the carton by lifting the
saw with the carrying handle.
Place the saw on a secure, stationary work surface
■
and look the saw over carefully.
WARNING
If any part is missing or damaged, do not plug
the saw in until the missing or damaged part is
correctly replaced. To avoid electric shock,
use only identical replacement parts when
servicing double insulated tools.
INSTALLING OR REMOVING THE BLADE
INSTALLING OR REMOVING THE BLADE
(FIG. 1 & 2)
WARNING
To reduce the risk of injury from a thrown
workpiece or thrown pieces of blade, do not use
a blade larger or smaller than 305 mm diameter.
WARNING
To reduce the risk of injury from unexpected
starting, unplug the saw whenever you are
removing or installing the blade.
ENGLISH
11
Werbung
