DRY AGER DX 1000 Premium S Gebrauchsanweisung Seite 46

24. Screw on the hinge bracket.
25. Insert the adjustable foot
from below and screw on the
bolt.
46
26. Insert the bolt completely
into the hinge bracket and
tighten the adjustable foot
manually.
27. Place the door on the bolt
and guide it to the hinge
bracket at the top.
Attention
The door must now be held by a
second person.
Front view of the upper hinge
31. Place the unit in its final position at the installation location.
Unscrew the adjustable foot at the lower hinge angle until it rests
on the floor, then continue to rotate 90°.
28. Insert the bearing bolts.
29. Insert the bearing bolt until
the groove of the bolt is in
line with the bore of the hinge
bracket.
30. Unscrew the screw from the
bearing pin and screw it into
the hole in the hinge bracket.