Changing The Door Hinge - DRY AGER DX 1000 Premium S Gebrauchsanweisung

Changing the door hinge

The door hinge should only be changed by trained specialists. Two
people are required for the modification.
44
1. Open the door approx. 130°.
2. Unscrew the screw from the
hinge bracket and screw it 3-4
turns into the bearing pin.
Attention
The door must now be held by a
second person.
3. Pull out the bearing bolts.
4. Slightly tilt the door to the side
and remove it upwards.
5. Disengage the cover with a
small screwdriver and remove.
6. Unscrew the lock and assemble
it again on the opposite side.
7. Snap the cover into place.
8. Disengage pressure plates at
the front and pull them
off to the rear .
9. Unscrew the handle and screw
it back on the opposite side.