Operating and control elements
Overview of controllers
Control buttons
Program selection:
· Standard mode: "Std"
· SmartAging® Program: "PG" + program number
· Display remaining time SmartAging program
· Increase the displayed value
· On / Off button UVC sterilization
· In Standard mode "dry" for Dry Aging or
"SAL" for salami production.
· Decrease the displayed value.
· Viewing/changing the temperature setpoint
in Standard mode.
· Display/change the humidity setpoint
in Standard mode.
· Select or confirm a parameter in the configuration
menu of the controller.
· On / Off button interior lighting
· Switch unit On / Off
Control buttons combinations
34
· Locking and unlocking the keypad
· Call up the configuration menu of the
controller to reset the UVC sterilization after
a replacement.
Symbols and characters
Temperature display
Standard mode:
Humidity display
SmartAging® mode:
"PG" + program number
Led / Symbol
Mode
Led 4
On
On
On
Flashes
Led 3
On
On
Flashes
On
On
On
Led 2
On
On
Flashes
Led 2
Led 3
Led 4
Function
Unit in stand-by, decimal point
°C temperature unit
Cooling
Switch-on delay cooling
Defrost active
Heating
Temperature set point /
relative humidity set point
An
Alarm situation exists
Ventilation active
Relative humidity % unit
UVC sterilization active
Interior lighting is per-
manently switched on
Interior lighting is only ac-
tive due to door opening