DRY AGER DX 1000 Premium S Gebrauchsanweisung Seite 45

10. Push on the pressure plates
until they engage.
11. Disengage the covers on the
inside, slide them outwards
and remove them.
12. Unscrew the hinge bracket.
13. Unscrew the closing bracket.
14. Screw the closing angle on
the opposite side again.
15. Screw the hinge bracket back
on the opposite side. Screw
3 screws into the marked
openings.
16. Slide the cover (with the
smaller opening) inwards
from the outside and snap it
into place.
21. Unscrew the hinge bracket.
22. Replace the cover on the opposite
17. Guide the cover with the
larger opening over the hinge
bracket, slide it inwards from
the outside and snap it into
place.
18. Loosen the adjustable foot
with the enclosed wrench.
19. Pull the bolt upwards and
unscrew it from the adjust-
able foot.
20. Pull out the adjustable foot
downwards.
side.
23. Remove the cover, turn it 180°
and replace it on the opposite
side.
45