Classifying Ip Packets (Diffserv) - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
2. Select the row KVM connection
3. Under Bandwidth limit (Mb/s)
connection in Mb/s.
NOTE:
Entering the value
4. Press F2 to save your settings.

Classifying IP packets (DiffServ)

For QoS purposes (Quality of Service) you have the possibility to use
Services Codepoints (DSCP) to classify the IP packets.
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
( data packets), as well as the IP packets of the video, audio and RS232
Communication
data ( Data data packets).
How to configure the DSCPs of the IP data packets:
1. Use the remote hotkey Ctrl+
2. Select the row
KVM connection
3. Enter the following data under
DiffServ Communication:
DiffServ Data:
NOTE:
Take into consideration that some network switches automatically
assign the service class
In such environments, the
4. Press F2 to save your settings.
Establishing a KVM-over-IP™ connection for the first time
Num to open the OSD of the computer module.
and press Enter .
you can set the bandwidth limit of a KVM-over-IP
0 deactivates the limit.
Num to open the OSD of the computer module.
and press .
Enter
Network control :
Define the Differentiated Services Codepoint
used for the classification of the IP packets of the
munication data packets.
Define the Differentiated Services Codepoint
used for the classification of the IP packets of the
data packets.
Network Control (DSCP name:
DSCP 48 option must not be selected!
Differentiated
(DSCP) to be
(DSCP) to be
CS6 ) for all data packets.
G&D VisionXS-IP-F-DP-UHR · 24
Com-
Data