G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung Seite 99

How to add a new remote target:
1. Use the local hotkey
2. Press F11 to open the Configuration menu.
3. Select the entry KVM Connection
4. Select the entry
Remote target
5. Press the F3 key to create a new remote target.
6. Enter the following data:
Name:
Hostname:
NOTE:
In the
Hostname
the Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
7. Press F2 to save your settings.
How to configure a remote target:
1. Use the local hotkey
2. Press F11 to open the Configuration menu.
3. Select the entry KVM Connection
4. Select the entry Remote target
5. Use the arrow keys
F5 key.
Establishing a KVM-over-IP™ connection for the first time
Alt + Num to open the OSD of the user module.
and press
and press
Enter
Enter the name of the G&D remote station to be
displayed in the Select menu.
Enter the IP address/host name of the
G&D remote station.
field, you can use the key combination
dialog. This dialog shows you all unpaired remote stations
+ to open the OSD of the user module.
Alt Num
and press
and press Enter
to select the remote target to be configured and press the
Enter .
.
to apply the IP address of the
Enter
Enter .
.
G&D VisionXS-IP-F-DP-UHR · 22
to open
Ctrl+F8