G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung Seite 117

How to configure the Freeze mode:
1. Press Ctrl+Num
2. Select the row
3. Under Freeze mode
off  Freeze mode is disabled (default)
on  Freeze mode is enabled
4. If the Freeze mode is active, press
under Freeze visualization
frame  shows a coloured frame when disconnected
 shows Frozen and the time passed since disconnection
OSD
frame+OSD  shows a coloured frame (
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the Freeze mode
Off
On | OSD timer + frame
Frame
OSD
6. Click on Save
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
F8
:
KVM extender .
.
Video channels .
Configuration .
field, select one of the following options:
 Show no image if the connection is lost (default).
 Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
 A disconnection is indicated by a coloured frame.
 Display of the warning Frozen and the time elapsed
since the disconnection.
.
Enter .
to select one of the options available
frame ) and Frozen (
G&D VisionXS-IP-F-DP-UHR · 40
Configuration
OSD )