Status Leds - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Status LEDs

Status LEDs
The LEDs on the back panel of the computer module and the user module let you
control the operational status of the KVM extender at any time.
Transmission 1 Transmission 2
Transmission 1 Transmission 2
Area Color
Transmission green
yellow
red
Network
green
yellow
Pwr
green
yellow
blue
59 · G&D VisionXS-IP-F-DP-UHR
Service Network Pwr Main Power Main Power
Service Network Pwr Main Power Main Power
Status
on
on
blinking
fast
blinking
an
off
on
on
on
on
on
off
Red. Power Red. Power
Red. Power Red. Power
Meaning
Logged on at G&D remote station.
Communication with a G&D remote station has been
established.
Connection to a remote station/network switch
established.
SFP module not detected.
Cable plugged into port that is not activated.
Unlock the port with a feature key.
Connection to remote station has not been
established.
The connection to the network has been
successfully established.
A connection could not be established.
The KVM extender is supplied with voltage and the
device software has been started successfully.
The KVM extender is supplied with voltage.
On as soon as the LED has been activated via
web application.
The KVM extender is not supplied with voltage.