TRWinProg Parameterization: C_58, CE_58 – 13 bit resolution
5.5 Position value
5.5.1 Position
In the online state in the field Position the current measuring system position is
displayed.
With entering of a value into the field Position the measuring system can be
adjusted on the desired position value. The new position is set if the function Data
write to device is executed.
Origin Type ≤ desired position value < programmed Total number of steps
5.5.2 Speed 1/min.
In the online state in the field Speed 1/min. the current measuring system speed in
-1
min
is displayed.
TR-Electronic GmbH 2005, All Rights Reserved
Page 84 of 107
TR - ECE - BA - DGB - 0039 - 14
Printed in the Federal Republic of Germany
07/30/2020