Preset Value; Preset Function; Origin Type - TR-Electronic C 58 Serie Benutzerhandbuch

TRWinProg Parameterization: CO_58 / C_H80 / C_H110

8.1.3 Preset value

The parameter defines the position value, on which the measuring system is adjusted
when the preset-adjustment-function is executed via the Preset-input.
Preset value
lower limit
upper limit
default

8.1.4 Preset function

If the Preset inputs are not used, they should be disabled to suppress interference.
Selection
In use
Not in use

8.1.5 Origin Type

Not supported, internally set to "0".
 TR-Electronic GmbH 2005, All Rights Reserved
Page 98 of 107
< programmed Total number of steps
Risk of injury and damage to property by an actual value jump when the
Preset adjustment function is performed!
• The preset adjustment function should only be performed when the
measuring system is at rest, otherwise the resulting actual value jump must
be permitted in the program and application!
Description
Preset adjustment function active
Preset adjustment function inactive
TR - ECE - BA - DGB - 0039 - 14
0
68 719 476 735
0
Default
user-specific
Printed in the Federal Republic of Germany
07/30/2020