Glossary - ATH-Heinl ATH-Lux 3D Bedienungsanleitung

treatments of the substances contained in these products,
or improper use of parts of them, may have on the envi-
ronment or on human health are prevented. Furthermo-
re, this helps to recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers and distributors
set up proper collection and treatment systems for these
products for this purpose.
Contact your local distributor to obtain information on the
collection procedures at the end of the life of your product.
When purchasing this product, your distributor will also
inform you of the possibility to return another end-of-
life piece of equipment free of charge as long as it is
of equivalent type and had the same functions as the
purchased product.
Any disposal of the product performed in a different way
from that described above will be liable to the penalties
provided for by the national regulations in force in the
country where the product is disposed of.
Further measures for environmental protection are recom-
mended: recycling of the internal and external packaging
of the product and proper disposal of used batteries (only
if contained in the product).
Your help is crucial to reduce the amount of natural re-
sources used for manufacturing electrical and electronic
equipment, minimise the use of landfills for product
disposal and improve the quality of life, preventing po-
tentially hazardous substances from being released in
the environment.
® U Ath-h
rheberrecht einl
s : 2022-01, P
tAnD roDUKthersteller
G h & c KG, A r
mb o lle echte vorbehAlten
Ath-h G h & c
einl mb
BRANDSCHUTZMITTEL
When choosing the most suitable fire-extinguisher refer
to the table below.
Dry ma-
terials
Water YES
Foam YES
Powder YES
CO YES
2
YES* Use only if more appropriate extinguishers are
not on hand or when the fire is small.
WARNING
The information in this table is of a general nature
and is intended to provide users with general
guidance. Contact the manufacturer for details
of the applications of each type of extinguisher.
Below is a brief description of some technical terms used
in this manual.
Characteristic Angles
This term refers to all the angles that can be normally
measured with a wheel aligner (total front/rear toe, left/
right and front/rear half toe values, left/right and front/
rear camber, left/right caster, left/right king pin angle,
and steering angle difference at 20°).
CCD
Special type of infrared sensorwith perfect linearity.
Clamps
Adapter between wheel and the measurement target.
Equatorial plane
Hypothetical vertical plane that divides the wheels into
two equal parts.
/ D
rUcKfehler UnD technische
KG
o
Flammable Electrical
liquids equipment
NO NO
YES NO
YES* YES
YES* YES*

GLOSSARY

Ä
nDerUnGen vorbehAlten
29