Jack & Hold Program; Service Procedure Screen; Unauthorised Uses - ATH-Heinl ATH-Lux 3D Bedienungsanleitung

JACK & HOLD PROGRAM
This program is started by selecting the "Adjustment
with car lifted" option from the F11
It allows the vehicle characteristic angles to be adjusted
with the axle concerned lifted, by first locking ("freezing")
the value displayed for the vehicle lowered, so that the
variation caused by the lifting operation is ignored.
Proceed as follows:
- with the vehicle lowered, select the "Adjustment with
car lifted" option from the F11
lock (freeze) the values;
- lift the vehicle;
- press F3
to confirm vehicle lifting;
- carry out the adjustment;
- select from the F11 menu
he "End of adjustment with car lifted" option to lock
(freeze) the values again;
- lower the vehicle;
- press F3
again to confirm vehicle lowering;

SERVICE PROCEDURE SCREEN

The service window is accessed by selecting the "Service
Programs"option from the F11
aligner program main window.
A list of the options available is displayed:
• Demo;
• Target Test;
• Technical Assistance;
Select an option and press Enter to access the procedure
chosen.
® U Ath-h
rheberrecht einl
26
menu
menu to
menu of the
G h & c KG, A r
mb o lle echte vorbehAlten
Select the "Demo" option and press enter to enable/
disable the program in demo mode.
Target cannot be used in demo mode, all values viewed
are random.
.
Enabling/disabling of this function is indicated by an
icon
the job window.

UNAUTHORISED USES

It is forbidden to use the aligner for any purpose other
than measuring the characteristic alignment angles of a
vehicle (see the "Characteristic Angles" section).
WARNING
Use of the aligner for any purpose other than its
original function releases the manufacturer from
all responsibility for any damage or injury that
may result.
It is recommended to use the Personal Computer installed
in the central unit only with the programs supplied by
the producer.
CAUTION
The software in the HARD DISK and in the upgrade
CD ROMs are the property of the producer and can
be used only with the personal computer supplied
with the machine.
CAUTION
It is highly recommended not to use the Personal
Computer for games or with other software based
on unauthorised copies, to avoid reducing system
as well as people's safety.
This is mandatory to avoid any possible contami-
nation from computer viruses.
In any case, it is recommended to have and authorised
Technical Service Centre to control the compatibility of all
original software not supplied by the producer.
CAUTION
Do not remove the Personal Computer from its
installation position to avoid damaging the con-
nections.
/ D
rUcKfehler UnD technische
s : 2022-01, P
tAnD roDUKthersteller
Demo
in the lower right-hand corner of
Ä
nDerUnGen vorbehAlten
Ath-h G h & c
einl mb
/
KG
o