INTORQ BFK458 Originalbetriebsanleitung Seite 116

Mechanical installation
Fig. 11: Mounting the complete stator
A
D
3. Screw the complete stator to the end shield Use the supplied screw set and a torque wrench (for tight-
ening torque, refer to the table Rated data: screw kit for brake assembly on separately screwed-on
flange, Page 24 ).
4. Remove the terminal clips and dispose of properly.
Fig. 12: Tightening the screws with a torque wrench
INTORQ | BA 14.0168 | 08/2019
Socket head cap screw
Rotor
B
Stator, complete
E
End shield
C
Terminal clip
39