Operation With External Temperature Controller - Heidolph Hei-PLATE Mix 20 l Betriebsanleitung

Operation

Operation with external temperature controller

Devices of the type Hei-PLATE Core can be operated with an
external temperature controller EKT Hei-CON (optional accessory).
For detailed instructions on setting up, connecting and operating
with a temperature controller, refer to the operating instructions for
the EKT Hei-CON (article number 01-005-004-61-61).
The port for the external temperature controller is located under
the protective cover on the back of the device.
No tools are required to open the protective cover.
WARNING
Risk of burn
As long as the temperature controller is not immersed in the
sample, the temperature of the ambient air is displayed. The
heating plate can heat up to 300 °C unnoticed!
➜
➜
➜
➜ Make sure that the device is switched on and the heating temperature is set.
➜ Immerse the temperature controller at least 20 mm deep in the sample to obtain a
stable reading.
➜ When making measurements, follow the instructions in the EKT Hei-CON manual!
Before switching on the device and for calibration, immerse the
temperature controller in the sample!
Do not place heat-sensitive objects on the heating plate.
Always use the necessary personal protective equipment
(heat-resistant gloves, eye protection, safety clothing) to
process samples from a temperature of 50 °C.
41