Henkel LOCTITE UVALOC 1000 Bedienungsanleitung Seite 45

8 Troubleshooting
• Open reflector flap
• After bulb has cooled down, pull off in
upward direction.
• Undo the two knurled nuts.
• Pull off cooling channel with filter map.
• Remove both bulb holder plates,
unscrew the two ceramics sockets from
the plates and mount the ceramic
sockets to the new bulb holder plates
out of the purchase package (change of
holder plates only necessary for the
assembly of an elliptic reflector!)
• Remove the 4 screws.
• Change reflector with a new or the
elliptic one.
• Re-assemble in reverse order.
• Close drawer and lock in place.
45