Switch From 500 W To 1000 W; Adjusting The Uv Minimum Alarm; Working With Parameter Sets - Henkel LOCTITE UVALOC 1000 Bedienungsanleitung

4 Installation
4.8

Switch from 500 W to 1000 W

• By tapping the camera icon in the side
menu, the Exposure menu page
appears.
• Press the rotary knob symbol to switch
between 500 W and 1000 W.
Notice!
The switch symbol is operated by
tapping, not by a gesture.
4.9

Adjusting the UV Minimum Alarm

Description see section 2.1.
• By pressing the tools icon, the
Settings menu page appears.
• Pressing the "Set UV Minimum" button
calls up the input dialogue.
• Enter the value and save by "RET"
(Return) or cancel by "ESC" (Escape).
4.10

Working with Parameter Sets

The settings mentioned before
- Exposure mode Time/CONT,
- Exposure time,
- Power 500/1000 W and
- the threshold for the UV minimum alarm
can be saved all together under a name, e. g. for different workpieces, which require
different settings. Other synonyms are "recipes" or „programmes".
• Press the camera icon or the tools icon, then the
button
• Select an entry from the list by tapping
on it or using the arrow keys on the
right.
Save the current exposure
settings to the selected entry.
Rename the selected entry.
Delete the selected entry.
Load exposure settings from the
selected entry.
29